Contact Person : Mandy
Phone Number : 86 15710610152
WhatsApp : +8615710610152
We use KEDA 4208 pressing machine, with a Compressor frequency of 7.3 times per min;
The mould surface would be applied on this machine, and now we already have more than 400
moulds, with more styles in developing.
Tile body pressed by KEDA machine shall be processed with drying procedure;
Aim to clear all the wet element in tiles and evaporate the water vapor on the surface, so to reduce defective
tiles with crack or glaze problem;
Temperature of drying kiln is ≤200℃, and drying procedure would be handled by 2 steps.
Inkjet printing machine
Mainly use JINGTAO which
has 8~12 channels
Open one design photo, Inkjet printing machine can print random parts according to the original
design photo, or can also locate certain parts to print on tile surface.
Before we can only produce 5800-6000㎡ for the kiln.
Now expand to 12000㎡ with the bigger kiln develped.
OEM & ODM Accepted.
MOQ for OEM: One Container for Inkjet Printing Products.
Requirement for OEM: Pls provide the original design sample pcs or high resolution designed photos for us to try out the most matching products for you. We will make sure that our sample is totally satisfying, and then start producing in quantity.
EXAMPLE: 300X600MM WALL TILE TRIED INTO 2 SURFACE: GLOSSY AND MATT
EXAMPLE: 600X600MM FLOOR TILE FOR PROJECT
DIFFERENT TIME MONITORING DURING PRODUCING
A detailed comparison photo for new sample and original designed ones.
We are developing more self-owned designs with our design team.
Enter Your Message